document number: 88554 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 15-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 glass passivated ultrafast rectifier byv26dgp, byv26egp vishay general semiconductor features ? superectifier structure for high reliability condition ? cavity-free glass- passivated junction ? ultrafast reverse recovery time ? low forward voltage drop ? low switching losses, high efficiency ? high forward surge capability ? meets environmental standard mil-s-19500 ? solder dip 275 c max. 10 s, per jesd 22-b106 ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. mechanical data case: do-204ac, molded epoxy over glass body molding compound meets ul 94 v-0 flammabi lity rating base p/n-e3 - rohs compliant, commercial grade base p/nhe3 - rohs compli ant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 cla ss 1a whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end note (1) peak reverse energy measured at i r = 400 ma, t j = t j max. on inductive load, t = 20 s primary characteristics i f(av) 1.0 a v rrm 800 v, 1000 v i fsm 30 a t rr 75 ns v f 1.3 v t j max. 175 c do-204ac (do-15) superectifier ? maximum ratings (t a = 25 c unless otherwise noted) parameter symbol byv26dgp byv26egp unit maximum repetitive pe ak reverse voltage v rrm 800 1000 v maximum rms voltage v rms 560 700 v maximum dc blocking voltage v dc 800 1000 v maximum average forw ard rectified current 0.375" (9.5 mm) lead length (fig. 1) i f(av) 1.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 30 a non repetitive peak reverse energy e rsm (1) 10 mj operating junction and storage temperature range t j , t stg - 65 to + 175 c
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88554 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 15-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 byv26dgp, byv26egp vishay general semiconductor notes (1) thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, mounted on pcb with 0.5" x 0.5" (12 mm x 12 mm) cop per pads (2) thermal resistance from junction to lead at 0.375" (9.5 mm) lead length with both leads attached to heatsink note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - maximum forward current derating curve fig. 2 - forward power loss characteristics electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol byv26dgp byv26egp unit minimum avalanche breakdown voltage 100 a v br 900 1100 v maximum instantaneous forward voltage 1.0 a t j = 25 c v f 2.5 v t j = 175 c 1.3 maximum dc reverse current at rated dc blocking voltage t a = 25 c i r 5.0 a t a = 165 c 150 max. reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 75 ns typical junction capacitance 4.0 v, 1 mhz c j 15 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol byv26dgp byv26egp unit typical thermal resistance r ? ja (1) 70 c/w r ? jl (2) 16 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode byv26egp-e3/54 0.428 54 4000 13" di ameter paper tape and reel byv26egp-e3/73 0.428 73 2000 ammo pack packaging byv26egphe3/54 (1) 0.428 54 4000 13" diameter paper tape and reel byv26egphe3/73 (1) 0.428 73 2000 ammo pack packaging 0 25 50 75 100 125 150 175 0 0.2 0.4 0.6 0.8 1.0 1.2 lead mounted on heat s ink s t a = ambient temperature temperature (c) average forward rectified current (a) mounted on p.c.b. 0.375 " (9.5 mm) lead length on 0.47 " x 0.47 " (12 mm x 12 mm) copper pad s t l = lead temperature re s i s tive or inductive load 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 0.2 0.4 0.6 0.8 1.0 1.2 average forward current (a) average power lo ss (w) d = t p /t t p t d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0
document number: 88554 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 15-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 byv26dgp, byv26egp vishay general semiconductor fig. 3 - maximum non-repetiti ve peak forward surge current fig. 4 - typical instantaneous forward voltage characteristics fig. 5 - typical reverse leakage characteristics fig. 6 - typical junction capacitance fig. 7 - typical transient thermal impedance 1 10 100 1 10 100 number of cycle s at 60 hz peak forward s urge current (a) t j = t j max. 10 m s s ingle half s ine-wave in s tan taneou s fo rwar d current (a) in s tantaneou s forward voltage (v) 0.2 0.6 1.0 1.4 1.8 2.2 2.6 3.0 3.4 100 10 1 0.1 0.01 t j = 150 c t j = 125 c t j = 25 c t j = 175 c t j = 25 c percent of peak rever s e voltage (%) 0 20406080100 100 10 1 0.1 0.01 0.001 in s tantaneou s rever s e leakage current (a) t j = 165 c t j = 125 c t j = 175 c 0.1 1 10 100 1 10 100 rever s e voltage (v) junction capacitanc e (pf) t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p 0.01 0.1 1 10 100 1 10 100 t - pul s e duration ( s ) tran s ient thermal impedance (c/w) mounted on p.c.b. 0.375 " (9.5 mm) lead length on 0.47 " x 0.47 " (12 mm x 12 mm) copper pad s
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88554 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 15-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 byv26dgp, byv26egp vishay general semiconductor package outline dimensions in inches (millimeters) do-204ac (do-15) 0.034 (0.86) 0.028 (0.71) dia. 0.140 (3.6) 0.104 (2.6) dia. 1.0 (25.4) min. 0.300 (7.6) 0.230 (5.8) 1.0 (25.4) min.
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
